Step-by-Step Fixes for Windows Error 651 - No Hassle

If you see Error 651 in your computer, don’t worry! This is a common Windows error and you canfix the connection failed error 651 quickly and easily.

The specific error message displays as: Error 651: The modem (or other connecting device) has reported an error . And the message is generally titled withConnection Failed with Error 651 .

How to fix the error 651 in my computer

1. Restart your computer and modem
2. Update your network card driver
3. Troubleshoot settings in Network and Sharing Center
4. Reset TCP/IP on your Windows
5. Disable the auto tuning feature

Why does the error 651 occur?

Note : If you have already known something about the error 651, you can skip toMethod 1

Error 651 is a common error for Windows users. It occurs when we try to connect usingPPPoE connection . PPPoE stands forPoint to Point Protocol over Ethernet , and it remotely connects multiple PC users on an Ethernet local area network.

Error 651 occurs because of various reasons, such as the incorrect Internet and IP configuration or the network card driver issue . Although you may not be able to locate the exact cause of this problem, you can try the following methods to troubleshoot the problem and solve it step by step.

Greeting Card Builder

Method 1: Restart your computer and modem

The network error 651 may be caused by yourPC or modem issue , and there may be something wrong when connecting. So you can restart your modem and PC/laptop to regain the connection.

1. Turn off your computer (please make sure you have saved all your current work before shutting down your Windows).

2. Turn off your modem and unplug it from the power source.

3. Unplug all the cables that are connected to the modem and computer.

4. Wait for at least 30 seconds. Then reconnect the cables correctly into your modem and computer.

5. Re- plug your modem with the power source, and turn it on.

6. Turn on your PC. After everything are working normally, try to connect again.

Method 2: Update your network card driver

The missing or outdated network driver can cause the error 651 in your computer, so you should update the network card driver in your Windows tofix connection failed with error 651 .

If you are not familiar with playing around with driver issues, you can do that withDriver Easy .

Driver Easy will detect the drivers condition in your computer, and install the correct drivers for your PC. More importantly, with Driver Easy, you don’t need to struggle figuring out the Operating System, and you don’t need to worry about making mistakes while processing. That will tremendously save your time and patience.

You can update your drivers automatically with either theFREE orPro version of Driver Easy. It only takes 2 simple clicks with the Pro version (and you will get full support and a 30-day money back guarantee).

Tips: You can also try the Offline Scan feature provided by Driver Easy. This will help you download and install the correct network driver without Internet connection.

1)Download and install Driver Easy (you can download the .exe file in a USB drive from a computer with the Internet connection, then install Driver Easy in this computer).

2. Run Driver Easy and clickScan Now . Then Driver Easy will scan your computer and detect any problem drivers.

Video Converter Factory Pro

3. Click theUpdate button next to the network device to download the correct driver (you can do that with theFREE version).

Or clickUpdate All to automatically download and install the correct version of all the problem drivers (you can do that withPro version , and you will be prompted to upgrade when you click_Update All_ ).

If you’ve tried Driver Easy, but the problem persists, please feel free to contact our support team at**support@drivereasy.com ** for further assistance regarding this issue. Our support team would be happy to help you resolve this issue. Please attach the URL of this article so we could assist you better.

4. After updating the driver, restart your computer, then try to connect again.

Method 3: Troubleshoot settings in Network and Sharing Center

When there is a problem with your network, the most common method is to check your network settings in your computer.

1. Disable IPv6 for your Internet connection

This method works for many users who have faced with this problem. You can simply disable the IPv6 connection for your dialer modem:

1. Right click theInternet icon at the bottom right corner on your computer, and clickOpen Network and Sharing Center .

2. ClickChange adapter settings .

Easy and Safe Partition Software & Hard Disk Manager

3. Right click your network connection, then clickProperties .

4. Uncheck the box next toInternet Protocol Version 6 (TCP/IPv6) . Then c lickOK to save the settings.

Power Tools add-on for Google Sheets, 12-month subscription

5. Reconnect to the network to see if your problem is solved.

If the problem still persists, you can try the next solution below:

2. Create a new dial up connection

Creating a new dial up connection on a computer is a helpful way to check if the modem is properly set to the bridged mode.

If you have created a network connection

If it’s the first time to connect to this network

If there has already been a dial up connection for your network, you can try to create a copy to solve your problem:

1. Right click theInternet icon at the bottom right corner, and clickOpen Network and Sharing Center .

2. ClickChange adapter settings .

CalendarBudget - Monthly subscription membership to CalendarBudget via web browser or mobile app. Support included.

3. Right click the dial up connection, and click selectCreate Copy .

4. Right click theoriginal dial up connection , and selectDelete .

5. Try connecting to the network again to see if it works.

If it’s the first time to connect to this network, you may need to create a dial up connection for it. Follow these steps:

1. Right click theInternet icon at the bottom right corner, and clickOpen Network and Sharing Center .

2. ClickSet up a new connection or network .

3. SelectConnect to the Internet in the popup wizard, then clickNext .

With Screensaver Wonder you can easily make a screensaver from your own pictures and video files. Create screensavers for your own computer or create standalone, self-installing screensavers for easy sharing with your friends. Together with its sister product Screensaver Factory, Screensaver Wonder is one of the most popular screensaver software products in the world, helping thousands of users decorate their computer screens quickly and easily.

4. SelectSet up a new connection anyway .

Parental Control Software

5. SelectBroadband (PPPoE) .

6. Enter theusername andpassword provided by your Internet Service Provider (ISP), and clickConnect .

Method 4: Reset TCP/IP on your Windows

TCP/IP is the short term forTransmission Control Protocol/Internet Protocol , and used as a communication protocol in the private network. They are responsible for different parts when processing the Internet connection. TCP defines how the programs can create the communication channels through a network, while IP is responsible for the address of each packet and make sure it is sent to the correct destination.

To solve error 651, you can also try to reset TCP/IP to reconnect to the Windows network stack.

1. Typecmd in the search box of the task bar. Right clickCommand Prompt (If you are using Windows 7, right clickcmd ) to selectRun as administrator . Then clickYes to confirm.

EmEditor Professional (Lifetime License, non-store app)

2. Copy the command below and paste it in your Command Prompt, then pressEnter on your keyboard:

netsh int ip reset reset.log

3. After the command completed, restart your PC and try to connect again.

Method 5: Disable the auto tuning feature

The Windows auto-tuning feature enables your Windows to continually monitor routing conditions such asbandwidth and network delay . It is turned on by default in your computer.If you are using the router as a connecting device, this method probably works for you. Follow the steps below:

1. Typecmd in the search box of the task bar. Right clickCommand Prompt (If you are using Windows 7, right clickcmd ) to selectRun as administrator . Then clickYes to confirm.

2. Copy the command below and paste it in your Command Prompt, then pressEnter on your keyboard:

Netsh interface tcp set global autotuning=disabled

3. After the command completed, try your Internet connection again to see if it works.

These are the best methods to fix theInternet connection failed with error 651 . What’s your solution for this problem? Share with us! And if your problem still persists, feel free to comment below and we will see what more we can do.

• network issue