How I Fixed My Non-Booting PC After a Windows 10 Update – Learn the Easy Methods

You must be anxious when your Windows 10 computer won’t boot after update. You get the BSOD and it repairs automatically then your computer goes blank and freezes. This issue could be fixed, read on to find how…

Before you try fixes, you should remove all the peripheral equipment and make sure the power cable is connected with your computer firmly. If you’re using a laptop, plug in your power cable instead of using the battery.

Disclaimer: This post includes affiliate links

If you click on a link and make a purchase, I may receive a commission at no extra cost to you.

Try these fixes

There’re 7 fixes, but you don’t have to try them all; just work your way down the list until you find the one that works for you.

1. Try the Startup Repair
2. Boot to Safe Mode
3. Use Command Prompt
4. Perform a system restore
5. Reinstall your system

Fix 1: Try the Startup Repair

When your computer won’t boot, the first fix is always booting your computer into the recovery environment (RE) and perform the Startup Repair. Here’s how:

1. Ensure your PC is off.
2. Press the power button to turn on your PC, then hold the power button down until PC shuts down automatically (about 5 seconds).
3. Repeat this more than 2 times until you see the Preparing Automatic Repair.
   
   Note : This step aims to bring up thePreparing Automatic Repair screen . If you’ve seen this screen for the first time when you power up the computer, skip this step.

4. When Windows doesn’t boot properly, your computer would attempt to fix the problem by itself. Then wait for Windows to diagnose your PC.
   
5. Next, you should see this screen. SelectTroubleshoot .
   
6. ClickAdvanced options .
   
7. ChooseStartup Repair .
   
8. Choose an account, type your password and clickContinue . It will diagnose your computer and fix it.
   

If the Startup Repair doesn’t work, then you can move to the Fix 2.

Fix 2: Boot to Safe Mode

Safe mode is an easy and convenient fix for the “Windows won’t boot” issue. It is an alternative boot scheme that uses a minimum of drivers, software and service to start your computer. By enteringsafe mode , you can trigger which part goes wrong and cause your Windows 10 computer won’t boot after update.

If your computer tells you Startup Repair couldn’t help, then you may follow steps to enter Safe Mode.

1. Click Advanced options.
   
2. Click Troubleshoot.

3. Click Advanced options.

4. Click See more recovery options.

5. Click Startup Settings.

6. Click Restart.

7. Use arrow keys to select Safe Mode, then press theEnter key.

Fix 3: Use Command Prompt

The broken system files may relate to this issue. If so, you could run Command Prompt to check and fix the problem.
The first few steps are the same asFix 1 .

1. When you seeAdvanced options , clickSystem Restore .
   
2. Choose the account, type password and clickContinue .

3. Typechkdsk/f to fix errors on the disk.
   
4. After this process, reboot your computer to check.

Fix 4: Perform a system restore

This problem could be fixed by performing a system restore. If your computer won’t boot after the update, then reverse to the previous system logically should fix this issue.
Please note, system restore only affect recently installed programs and drivers.

The first few steps are the same asFix 1 .

1. When you seeAdvanced options , clickSystem Restore .
   
2. Choose the account, type password and clickContinue .

3. Choose a restore point.

4. ClickYes to start system restore.

Fix 5: Reinstall your system

If all else fails, you may have toreinstall your system . Reinstalling will delete all the data on your hard drive and this fix takes quite a long time.

If your system files have been damaged, reset your Windows 10 let you lose your data. But you turn something like that kind of insane crazy attractiveness

Hopefully this article has helped you resolve the ‘Windows 10 won’t boot after update’ error. If you have any questions or suggestions, please leave a comment below, and we’ll do our best to help.

• Windows 10